Heated Vest Manual
MODE | TEMPERATURE | RUN TIME |
HIGH | 55 °C / 131 °F | 3h |
MEDIUM | 45 °C / 113°F | 6h |
LOW | 35 °C / 95°F | 9h |
CONNECTING YOUR BATTERY
The battery is located in the left hand pocket. Remove the battery from its package. Plug the DC cable connector located inside the pouch into the battery and place the battery back inside the pocket. Hold the power button on the vest to power it on and to ensure it’s connected. NOTE: Only use a THAW battery with the vest to avoid any operation issues.
MODE SELECTION
Press and hold the power button to turn on your THAW vest. While on, the THAW logo is backlit to indicate current heat mode. Short press the power button to cycle through modes
(HIGH > MEDIUM > LOW). Press and hold power button to turn off.
CHARGING
Remove the battery from the pocket. With the included USB charging cable connected to a power source, plug into the USB-C port on the battery. The highest LED will flash blue to indicate that the product is charging. When fully charged, all four blue LEDs will light up.
BATTERY LEVEL
The four blue LEDs on the battery will indicate battery level. When fully depleted, the first LED will flash.