Heated Scarf 2 Manual

CONNECTING YOUR POWER BANK

Locate the zippered pouch on the scarf and remove the power bank. Remove the power bank from its package. Plug the USB-A cable located inside the pouch into the power bank and place the power bank inside the pouch. Close the zipper pouch and press and hold the power button on the scarf to power it on and to ensure it's connected. It is recommended to fully charge the power bank before use.

MODE SELECTION

Press and hold the power button to turn on your THAW scarf. While on, the THAW logo is backlit to indicate the current heat mode.

Short press the power button to cycle through modes
(HIGH > MEDIUM > LOW).

Press and hold power button to turn off.

MODES

  • THAW High
  • THAW Medium
  • THAW Low

CHARGING

Remove the power bank from the zipper pouch. With the included USB charging cable connected to a power source, plug the other end into the USB-C port on the power bank. The highest LED will flash blue to indicate that the product is charging. When fully charged, all four blue LEDs will light up.

BATTERY LEVEL

The four blue LEDs on the power bank will indicate battery level. When fully depleted, the first LED will flash.

MAINTENANCE AND CARE

Remove battery before washing. The power cable must be covered with the included cap and tucked inside the battery pocket before washing. Machine wash on gentle/delicate cycle. Hang or tumble dry on low heat.

WARNING: Product is not waterproof, but can be used outdoors. Take appropriate precautions.