Heated Wrap 2 Manual

CONNECTING YOUR BATTERY

Locate the pouch on inside of the wrap and remove the battery. Remove the battery from its package. Plug the DC cable connector located inside the pouch into the battery and place the battery inside the pouch. Close the pouch and press and hold the power button on the wrap to power it on and to ensure it's connected.

MODE SELECTION

Press and hold the power button to turn on your THAW wrap. While on, the THAW logo is backlit to indicate current heat mode. Short press the power button to cycle through modes (HIGH > MEDIUM > LOW). Press and hold power button to turn off.

MODES

  • THAW High
  • THAW Medium
  • THAW Low


CHARGING

Remove the battery from the pouch. With the included USB charging cable connected to a power source, plug into the USB-C port on the battery. The highest LED will flash blue to indicate that the product is charging. When fully charged, all four blue LEDs will light up.

BATTERY LEVEL

The four blue LEDs on the battery will indicate battery level. When fully depleted, the first LED will flash.

MAINTENANCE AND CARE

Remove battery before washing. The power cable must be covered with the included cap and tucked inside the battery pocket before washing. Machine wash on gentle/delicate cycle. Hang or tumble dry on low heat.